Engineering Expert Witnesses in North Carolina

ID: 141655

North Carolina

Dr. Lindsay M. Oleson has 16 years of experience in the field of Forensic Engineering with expertise in Motor Vehicle Accident Reconstruction and Biomechanical Analysis. She earned her Bachelor of Science in Engineering from Arizona State University. Dr. Oleson is a Licensed Professional Engineer in multiple states and is certified as an Accreditation Commission for Traffic Accident...

E-005982

North Carolina

This certified compounding pharmacist has received his training from a top pharmacy program and holds clinical and academic positions in his field at both pharmacy and medical schools. He has given invited lectures on compounding pharmacy, and has authored major publications on the topic. Furthermore, he has been in practice since 1977 and has owned a compounding-only pharmacy since 2003. He...

ID: 2196

North Carolina

This highly qualified expert of electrical engineering earned his BS from the University of Auckland as well as his MS and PhD in electrical engineering from the University of Southern California. He has published over 50 peer-reviewed publications and has presented internationally on topics in the field, including fiber optics. Formerly he served as an associate professor at Georgia Institute of...

E-007736

North Carolina

This expert has over 35 years of experience of experience, specializing in bicycle accident investigation. He is on the ASTM Committee for bicycle standards. Previously President of the National Academy of Forensic Engineers, he is a Fellow of both the American Society of Civil Engineers and the National Academy of Forensic Engineers. He is a Registered Professional Engineer for ten states and...

ID: 29905

North Carolina

This qualified expert has had 20+ years experience in the mechanical engineering field for automotive compliance. He received his BS from Virginia Polytechnic Institute and State University. He served as an employee for Goodyear for two decades as a technology manager, designer for six sigma, manager for military and government compliance and as an innovation program manager. He later established...

E-007839

North Carolina

This expert has been working with fire extinguishing systems for 40 years. He is a Registered Professional Engineer and holds membership in both the Society of Fire Protection Engineers and the National Fire Protection Association. He spent 15 years working for Ansul/Wormald, starting as a Development Engineer of fire suppression products and working his way up through the roles of Manufacturing...

ID: 33499

North Carolina

This expert has 40 years of experience in engineering, and specializes in air systems. He earned his BS in mechanical engineering from North Carolina State University and is a licensed professional engineer. He has formally served as an engineer for RJ Reynolds Tobacco Company, a systems engineer for Air Permits and Industrial Ventilation, an engineer at AC Corporation, and as the owner of...

E-008418

North Carolina

This highly qualified expert has 30 years of experience in the design, construction, and operation for various racing circuits in the world. He holds a B.Sc. in Civil Engineering from the University of London and has been certified as an Instructor in Track Safety by the Sport Car Club of America. He has worked on various motorsports facilities including Formula One and motorcycle circuits. 'He...

ID: 38669

North Carolina

This expert earned his BS in electronic and electrical engineering and has been working in engineering for over 25 years since. He is the former manager of Northern Industrial Electronics and Sterling Services and then went on to hold a role as an electronic production manager at Paragon Atlantic. He is currently the owner of a systems and electronic engineering firm in North Carolina.

E-001093

North Carolina

This highly qualified expert has years of experience in textile engineering. He received both his BS and PhD degrees in chemistry from North Carolina State University, where he later served as the associate head of the Textile Engineering, Chemistry and Science Department. He is member of various professional associations, including the American Chemical Society, the American Association of...

ID: 46061

North Carolina

This expert in warranty data analysis has over 30 years of experience in his field. He earned his BS in mechanical engineering from the Indian Institute of Technology, followed by both his MS and PhD in operations research from Cornell University. He has held several positions at the University of North Carolina at Chapel Hill, including professor and chair of operations research, as well as...

E-598385

North Carolina

This highly-qualified expert engineer has over 20 years of experience developing semiconductor chips targeting mobile and datacenter products, with his work focused on chip/ASIC/SOC design, CPU design, circuit design. He earned his BA in computer engineering from the University of Waterloo and his MS in electric engineering at the University of California, San Diego. Today, he is a recognized...

ID: 6209647

North Carolina

Mr. Charley M. Pereira has 32 years of experience in Transportation Safety. He earned his BS in Aeronautical Engineering from Embry Riddle Aeronautical University. Today, this expert is licensed as a General Contractor in the state of North Carolina and as the United States Coast Guard Captain in the state of Maryland. Formerly, this expert served as a Senior Aerospace Engineer of the Engineering...

ID: 655868

North Carolina

|

South Carolina

Mr. Brian M. Boggess has 23 years of experience in the field of Mechanical Engineering. He earned his BS in Mechanical Engineering and his MS in Mechanical and Aerospace Engineering from the University of Virginia. Today, this expert is a licensed Professional Engineer in 28 states. Formerly, this expert served as a Senior Engineer at Honda R&D Americas Inc., and as a Senior Project Engineer at...

ID: 6629683

North Carolina

Mr. Michael Robert Simac has 55 years of experience in Civil Engineering with expertise in Geotechnical Engineering and Forensic Engineering. He earned his BS and MS in Civil Engineering from the University of Missouri Columbia. Today, this expert holds a Professional Engineer license in 17 states. Formerly, this expert held roles as Regional Sales Engineer at the Tensar Corporation, as the...

ID: 6891731

North Carolina

Mr. Colin M. Campbell has 32 years of experience in the Environmental Compliance with a specialized focus on Pollution, Air Sampling and Testing. He earned his BS in Mechanical Engineering and Economics at North Carolina State University. Formerly, this expert held roles as an Environmental Engineer at John Wood Group PLC and as an Assistant Project Engineer at AECOM Technology Corporation....

ID: 6936932

North Carolina

Dr. Joseph D. Manning has 10 years of experience in the field of Mechanical Engineering. He earned his BS, MS, and Ph.D. in Mechanical Engineering from North Carolina State University. Today, this expert is certified as a Student Pilot and Remote Pilot through the Federal Aviation Administration and is licensed as a Professional Engineer in the State of North Carolina. Formerly, this expert...

ID: 714914

North Carolina

Mr. Heath C. Spivey has 16 years of experience in Mechanical Engineering with expertise in Accident Reconstruction. He earned his BS in Mechanical Engineering from North Carolina State University and his MS in Engineering and Transportation from the University of North Carolina Charlotte. Today, this expert is certified as a Remote Pilot by the Federal Aviation Administration and licensed as a...

ID: 88062

North Carolina

Mr. Johnnie P. Hennings has 29 years of experience in Mechanical Engineering. He earned his BS in Mechanical Engineering from North Carolina State University. Today, this expert is a Licensed Professional Engineer in the state of North Carolina. Formerly, this expert served as Operation Staff at Walnut Creek Amphitheater and as an Assistant Engineer and Staff Engineer at Accident Reconstruction...

ID: 88221

North Carolina

Mr. Gary R. Rogers has over 10 years of experience in Machinery Design, Vehicle Dynamics, Crashworthiness, Structural Fatigue, and Automotive Transmissions. He earned his B.S. in Mechanical Engineering from North Carolina State University-Raleigh, B.S. in Animal Science from Michigan State University-East Lansing, and M.S. in Mechanical Engineering from the University of Michigan-Dearborn. Mr....