Engineering Expert Witnesses in Georgia

This computer engineering expert earned his BS in computer engineering from the University of Florida. He has founded and served as the principal software engineer for several companies, including AutoNOC, TQ Leads, and Metacogna. He is proficient in over 30 programming languages and his company, AutoNOC was recognized as a Top 40 Technology Innovator by the Technology Association of Georgia. This expert currently serves as a consultant for a technology consulting company based in Georgia.

This highly qualified expert has over 30 years of experience as an engineer. He received a B.S. in Mechanical Engineering from the Georgia Institute of Technology and is a Registered Professional Engineer in 9 states. A member of both the American Society of Mechanical Engineers and the National Academy of Forensic Engineers, he has published several articles on various issues including cranes and plumbing failures. He previously worked for Georgia Power Company where he maintained different plant aspects and addressed deficiencies. He also worked at Cerny & Ivey Engineers, Inc. where he managed the engineering and technical staff as well as mechanical/electrical/structural engineering and testing responsibilities. He currently serves as President and Principal Engineer for an engineering company that consults in failure investigations, safety, design, and products and materials testing.

This expert is a registered professional mechanical engineer with extensive hands-on experience in thermodynamics and testing. He earned his Masters and PhD in Mechanical Engineering from Georgia Institute of Technology. He has held a number of engineering positions and is currently a Professor of Mechanical Engineering focusing on thermodynamics at a technical university in the Atlanta area. Primary activities have focused on basic and applied research in the areas of constitutive model development and processing, mechanical property characterization, and structural testing & analysis for advanced materials including high performance and ultra-lightweight polymers, polymeric composites, and metals. Specifically, areas of expertise include formulating new constitutive relationships and associated experimentally-based methodologies for characterizing the time, rate, environmental, and temperature dependent mechanical response of materials; the development of laboratory testing techniques and instrumentation for investigating and determining structural and material behavior, low velocity impact effects, and related phenomenological events in composites; and the development of analytical and numerical methods for characterizing and modeling the environmental degradation, long-term durability, and damage tolerance of polymer matrix composites and MEMS structures. Current topics include experimental mechanics, MEMS, structural analysis and design, rheology, thermochemical analysis, fatigue life assessment and prediction, micromechanics and long term durability.

Please see full CV

This expert is currently the Vice President of a company engaged in the construction and maintenance of electric utliity infrastructure. Prior to joining tht company, he was Vice President at Osmose Utilities Services, Inc. for 8 years in both operations and business development engaged in utility system maintenance and field data capture. This expert has over 20 years of electric utility craft, engineering and management experience at a fortune 250 utility. He received his Electrical Engineering Degree from Auburn University and MBA from Florida Institute of Technology. His utility experience includes management of large construction, maintenance and engineering organizations in the areas of distribution, transmission, substation, and metering as well as management of utility contract personnel. This expert led the development and execution of a comprehensive distribution asset management strategy. He served as Director of the Major Storm Restoration Center. He received both the President's award and Chairman's award for his utility contributions and the Special Achievement Award at Osmose.

This qualified engineer obtained his BS in Civil and Structural Engineering and his MS in Management of Technology from Kennesaw State University and Southern Polytechnic State University. He is a certified Professional Engineer and is certified in OSHA requirements and engineering and surveying. He is a member of the National Society of Professional Engineers and the National Academy of Forensic Engineers. He has 8 Publications and is currently a Structural Design and Forensic Engineer at an engineering firm in the southeast. Some of his fields of expertise include forensic/failure and safety analysis, civil/structural design of public and private structures, and construction site accident investigations. A partial list of past subjects addressed include wood/concrete deck collapses, commercial/residential roof damage evaluations, excavation failures/incidents product liability, traffic accident reconstruction, mold source evaluation, construction cost estimating, hydrology/sewer studies, airport consulting, roadway design, geotechnical/subsurface investigations, construction materials failure analysis, structural analysis and design of various material components, scaffolding failures, water damage source evaluation, structural damage inspections, OSHA compliance evaluations, and concrete/asphalt pavement evaluation and design. Has an intimate knowledge of OSHA worksite regulations, and the various national building codes and standards for Industrial, Commercial and Residential structures.

This expert has over 30 years of experience with civil and structural engineering. He gained his BSc in civil engineering from the University of New Mexico, his MSc in structural engineering from the University of California, Berkeley, and his MBA from the Thunderbird School of Global Management. He is a registered professional engineer in California, New Mexico, Texas, and Georgia, and the past president of the Georgia section of the American Society of Civil Engineers. He was honored as Georgia's Engineer of the Year in 2015. Awards include Boy Scouts of America Beaver Award for Youth Exploring Engineer Academy at Georgia Tech. Currently he is the director of engineering of a construction company in Georgia.

This expert has significant experience in the development of new products and new test methods for their evaluation, including emerging nano and bio technology based products for healthcare, body protection, space exploration, etc. applications. His research contributions cover the areas of objective evaluation of subjective properties, the study of structure-property relationships, and process/product optimization. He completed his BS and MS in Textile Technology at the University of Madras. In addition, he is active in his field serving as a leader in several AATCC technical committees and in the Fiber Society. Formerly, he held roles as Professor of Textile Technology at the University of Madras, Research Associate at North Carolina State University, and Research Scientist at Georgia Institute of Technology. Currently, he serves as Principal Research Scientist at Georgia Institute of Technology. In this position, he coordinates the industry support activities of his school and works extensively with the global textile and allied industries to solve a wide range of problems associated with the design, production and quality of fiber based products. His background in materials covers all three material types - polymers, metals and ceramics. In the last 12 years, he served as an expert witness in more than 25 litigations spread across multiple states. He worked for both defendants and plaintiffs represented by the local, state and federal government and private agencies.

This expert earned his BS in mechanical engineering from the University of Texas at Austin and his MS in product design engineering from Stanford University. He has seven years of industry experience working as a product designer for Ford Motor Company and Volkswagon of America. He has over fifteen years of experience designing products for automotive and home electronics clients. This expert is currently a professor of industrial design at a university in Georgia and the principal of a design and engineering consultancy.